2012-05-16

Fixing Philips SA2620/SA2640 mp3 players

Recently I've bought huge pack of damaged and incomplete mp3 players - mostly as a cheap parts source hoping to find few TEA5767 FM radio modules inside.
Most of these devices are not worth fixing nowadays (1 GB or less FLASH memory and/or severe mechanical damages) there were few Philips SA2620 (2 GB) and SA2640 (4 GB) players that were very easy to repair.
After connecting to PC they were recognized either as Mass Storage Device with VID 0471, PID 2030 (most of them) that failed to initialize with error code 10 or as HID device, VID 066F (SigmaTel), PID 3700  (AFAIR only one of the eight pieces).
To fix this problem download Philips Device Manager - software used to restore or upgrade player firmware. Install & run. If mp3 player was not enumerated as HID device connect it to USB port while pressing "backspace" button (at the top of the player), it would be enumerated as HID then and Philips software would detect it and offer fixing it. After 1 minute device firmware would be restored.
Note that all previous FLASH memory content would be erased.

3 comments:

  1. Is device enumerated as HID (check system device manager for driver used)? Is Philips software detecting it? This is also mature application so I'd use it with Windows XP if possible.

    ReplyDelete
  2. Hello,

    I know this entry is an old one, but maybe someone could help me all the same. My SA2640/02 device won't power up, when connected via USB its indeed detected as HID (VID066F) but won't show up on Philips Manager. What else can I do? Connecting with 'back arrow' button pressed is all the same.

    ReplyDelete
  3. I found your this post while searching for information about blog-related research ... It's a good post .. keep posting and updating information. best-waterproof-mp3-players

    ReplyDelete